How to Choose the Right Installation Location for a Wall-Mount Network Cabinet？- Cixi Communication Technology Co., Ltd

Wall-mounted network cabinets are used to install network equipment such as switches, routers, and servers. Their installation location directly affects the heat dissipation, maintenance convenience, and network stability of the equipment. Choosing a suitable installation location for the wall-mounted network cabinet can better play the role of the network cabinet.

Content

1 1. Requirements for the installation environment
2 2. Physical Space and Load-Bearing Requirements
3
4 3. Installation Process Example

1. Requirements for the installation environment

(1) Temperature and humidity control

Temperature: The optimal operating temperature is 10°C~35°C. Avoid high temperature areas (such as direct sunlight and heaters).
Humidity: The relative humidity should be maintained at 30%~70% to prevent the equipment from getting damp or static electricity accumulation.
Ventilation: Ensure that the surrounding air is circulating and avoid confined spaces (such as small distribution rooms).

(2) Dust and corrosion prevention

Dusty environment (such as factories and warehouses): Choose a cabinet with good sealing or install a dust filter.
Chemical corrosion (such as laboratories and chemical plants): Avoid acidic/alkaline gas environments and choose cabinets made of corrosion-resistant materials (such as stainless steel).

(3) Electromagnetic Interference (EMI)

Keep away from strong electromagnetic sources: such as large motors, transformers, and high-voltage cables (at least 1 meter away).

2. Physical Space and Load-Bearing Requirements

Wall Type	Load-Bearing Recommendations	Reinforcement Options
Concrete Wall	Ideal, can be secured directly with expansion bolts	No additional reinforcement required
Brick Wall	Verify that it is solid brick; be cautious with hollow bricks	Use through-wall bolts or add backing plate
Gypsum Board Wall	Not recommended, poor load-bearing capacity	Back studs or reinforced steel frames are required

3. Installation Process Example

Planning the Location: Determine the locations based on the network equipment distribution and the wall's load-bearing capacity.
Marking and Drilling: Use a level to calibrate and drill holes in the wall (the hole diameter should match the expansion bolts).
Securing the Cabinet: After mounting, test for stability and ensure it remains stable even when shaken.
Equipment Installation: Install heavy equipment (such as a UPS) first, then route cables.
Power-On Test: Check that the cooling fan, door locks, and grounding are functioning properly.